HPHT Filter Press GGS71-A

product_banner
HPHT  Filter Press GGS71-A-3426
HPHT  Filter Press GGS71-A-3425
HPHT  Filter Press GGS71-A-3427
HPHT  Filter Press GGS71-A-3424
HPHT  Filter Press GGS71-A-3423
_0003_DSC_0739
_0002_DSC_0742
GGS71-A
_0001_IMG_20200811_162239
_0000_IMG_20200811_162348

HPHT Filter Press GGS71-A

Product Introduction

HPHT filter press named GGS71-A is a professional instrument, used to measuring the filtration amount of drilling fluid and cement slurry under simulative deep well conditions (high temperature and high pressure), and also make filter cake after filtering under the same conditions. The filter is mainly composed of main body (base, stand bracket, heating system), tee valve, drilling fluid cup, high pressure filtrate receiver and QG-80 pressurized manifold, etc.

The instrument adopts corrosion-resistant stainless steel drilling fluid cup, electric heating sleeve for automatic constant temperature control, stainless steel shell and external heating insulation layer, which has the characteristic of long service life, high measurement precision, small repetition error, safe and reliable, simple operation, accurate measurement and etc. It has widely used for measuring the filtration amount of drilling fluid and cement slurry in oil fields, scientific research institutes, laboratories and other departments.



Working principle

Pour the quantitative drilling fluid samples into the drilling fluid cup. After sealing, put the drilling fluid cup into the heater and heat it. At the same time, inflated and pressurized the drilling fluid cup quantitatively through the pressurizing pipe. Under some kind of temperature and pressure conditions, pressurize the sample to produce the filtrate pass through the filter screen or filer paper in the drilling fluid cup, and then evaluate the filtration performance of drilling fluid by measuring the volume of filtrate.



Models and Specifications

Name

Model

Configuration

HPHT filter press

GGS71-A

Through   hole/no hole drilling fluid


The main technical parameters

 NO.

Item

Technical   specifications

1

Power supply

AC220±11V 50Hz

2

Rated power

1KW

3

 Operate pressure

7.1MPa

4

Saver pressure

3.5MPa

5

Maximum   drilling fluid volume

500mL

6

Filter area

3.5in2 22.6 cm2  

7

Gas supply

Nitrogen, carbon dioxide(No impurities such as oil and water)

8

Operate   temperature

Normal to 232℃±5℃

9

Net weight/Gross weight

28.36kg/38.6kg

10

Dimensions

480×350×780mm

11

Packing dimensions (wooden box)

790×450×415mm


Inquiry now
0